Professional Industrial Cyclone Dust Collector / Collector
Equipment
Introduction of Professional Industrial Cyclone Dust Collector /
Collector Equipment
The cyclone dust remover is composed of the intake pipe, exhaust
pipe, cylinder body, cone and ash bucket. The cyclone dust remover
is simple in structure and easy to manufacture, install and
maintain, and has been widely used to separate solid and liquid
particles from the air stream or from liquids. It has more than 80
per cent dust removal efficiency of more than 5um. In mechanical
dust removers, cyclone dust removers are the most efficient. It is
suitable for non-viscous and non-fibrous dust removal, mostly used
to remove more than 5 m particles, and the connected multi-tube
cyclone dust remover device for 3 m particles also has 80 to 85%
dust removal efficiency, suitable for smelting, casting,
sandblasting, building materials and reflectance materials and
other industries, can be used for coarser material collection and
dust removal system first-level dust removal.
Features of Professional Industrial Cyclone Dust Collector /
Collector Equipment
1, The cyclone dust collector is suitable for use as a primary or
pre-filter, capture, separation of dust efficiency is high;
2, Cyclone dust removal resistance is small, the processing wind
volume is large, stable performance;
3, Dust collector covers a small area, simple structure, easy
installation and maintenance;
4, Automatic ash removal, gate valve ash removal.
Advantages of Professional Industrial Cyclone Dust Collector /
Collector Equipment
1. The cyclone dust collector has a small equipment structure,
fewer covers, low cost, and resistance;
2. The cyclone dust collector can be used for high-temperature dust
gas purification, general carbon steel manufacturing cyclone
separator can be used for 100 ℃ flue gas purification.
3. Dry ash removal, it is helpful to recover valuable dust;
4. The dust collector is widely applicable, dust collector in
laying wear-resisting, corrosion-resistant lining, can be used to
dust in the flue gas purification with high corrosion.
FAQ
If you have any question when you contact or before place an order
to us, please first check the below information for reference. You
can find information that can help you decide whether your product
or related accessory needs service, and see what service options
are available to you.
1. Which countries are your products sold?
The products of Zhengzhou Huaqiang Heavy Industry Co., Ltd. have
been exported to more than ten countries and regions such as the
United States, Germany, Japan, Russia, Australia and countries in
the Middle East and Africa.
2. How to pack the product?
For the sake of safety, we use wooden cases or containers to avoid
damage to the products.
3. How long is the delivery time of the product?
Usually, our delivery time is 25 to 30 days.
4. What is the after-sales service?
a. Free assignment of professional after-sales service personnel,
arrived at the site to guide the customer installation and
commissioning.
b. Train operators on site.
c. After the installation of the complete set of equipment,
technical personnel shall be left to assist the customer in field
production for free until the customer is satisfied.
5. With what payment?
Our payment methods include L/C, T/T, Western Union, MoneyGram.
