Bio Organic Fertilizer Wet Material Drying And Cooling Machine
Introduction to Bio Organic Fertilizer Wet Material Drying And Cooling Machine
This fertilizer cooler machine is used for the production of
compound fertilizer and organic fertilizer, cooling fertilizer
pellets with certain temperature. Using dryer together can greatly
improve the cooling rate, reduce labor intensity and improve the
quality, further remove moisture, reduce the grain temperature of
fertilizer. At the same time, it also can be used for cooling
powder and other granules materials.
Specifications of Bio Organic Fertilizer Wet Material Drying And Cooling Machine
| Model | shell | Feed temperature | Discharge temperature | Motor | Decele vators model |
| Inner diam | length | inclination | Rotation speed | Model | Power | Rotation speed |
| mm | mm | 0 | r/min | °C | °C | Kw | r/min |
| LQ10100 | 1000 | 10000 | 2-5 | 4.6 | 60-80 | <40 | Y132m-4 | 7.5 | 1440 | ZQ350 |
| LQ12120 | 1200 | 12000 | 2-5 | 4.6 | 60-80 | <40 | Y132m-4 | 7.5 | 1440 | ZQ350 |
| LQ15120 | 1500 | 12000 | 2-5 | 5 | 60-80 | <40 | Y160L-4 | 15 | 1440 | ZQ400 |
| LQ15150 | 1500 | 15000 | 2-5 | 5 | 60-80 | <40 | Y160L-4 | 15 | 1440 | ZQ500 |
| LQ18160 | 1800 | 16000 | 2-5 | 5 | 60-80 | <40 | Y200 L1-6 | 18.5 | 970 | ZQ500 |
| LQ20200 | 2000 | 20000 | 2-5 | | 60-80 | <40 | Y200 L1-6 | 22 | 970 | ZQ650 |
Working principle of Bio Organic Fertilizer Wet Material Drying And Cooling Machine
This rotary drum fertilizer cooling machine adopts heating exchange
method to cool materials. It is equipped with welded steel spiral
scraping wings in front of the tube, lifting board at the end of
the rotary body, and auxiliary piping system in the feed end of the
cooling machine. The belt and pulley are driven by the main motor
and through the reducer the drive shaft is put in motion. The open
gear installed on the driving shaft and big bear ring installed on
the body working together under the rotation of drive shaft. The
evaporator absorbs heat and the condenser emits heat. With the
working of fan, moist air enters from the left air inlet and takes
heat exchange through evaporator to achieve the purpose of
insulation and dehumidification of air. After being dried by rotary
drum dryer, fertilizer granules are sent into the cylinder through
the feed box. In the rotating tube, the materials are picked by the
lifting board and spread evenly. The high temperature materials
interact with the upstream of the cold air and the heat within the
materials diffuse to the surface and taken away. Then the materials
are collected through discharging hole.
Features of Bio Organic Fertilizer Wet Material Drying And Cooling Machine
1. This rotary cooling machine uses high quality anticorrosion and
wear-resistant materials which greatly improve the service life of
the machine.
2. Reasonable design of lifting board helps to maximize heat
transfer between the high-temperature material and the cooling air.
It can improve the cooling efficiency and cool the materials
evenly.
Advantages of Bio Organic Fertilizer Wet Material Drying And Cooling Machine
1. With reasonable design of lifting blade, it has dependable
performance.
2. Energy-saving, even cooling, easy to clean and maintain.
3. High efficiency
4. Compact structure
Applications of Bio Organic Fertilizer Wet Material Drying And Cooling Machine
The rotary cooler can be used in many different industries, such as
metallurgy materials, construction materials, food industry, light
industry, chemical industry, mining industry, cement production
lines etc.
